The new replacement modules for Pulsar, Hamilton and Omega LED watches are finally available!

They are a 1:1 replacement for the following LEDs - Pulsar: P2, P3 Date/Command, Date II Omega: Time Computer I and II with Caliber 1600 / 1601 modules Hamilton: Early QED watches with either time or time/date function and magnet setting. We are proud to mention, that the setting, the display and the appearance is as close to the orginal RCA-module from the 70s as possible. There is no viewable difference through the red crystal.

3) This picture shows the new SASM-13 module on an original Pulsar carrier. The new SASM-14 movement has the same look, however the data feature of the SASM 23 has been integrated. All modules are always hand assembeled and of couse there are different parts on it compared to the original. However we tried to keep it as close as possible to the 70s look.

4) And here´s a view on the back with original plastic carrier and the original quartz.

The best way to find out if you have a new SASM module is the lack of the light sensor close to the lower right of the display. The original plastic carrier, all three or four reed switches, the quartz and the original display are always taken out of non-working Pulsar, Omega and Hamilton modules which were not repairable. So the original look of the indication is always guaranteed.

If you send your module for repair or exchange we always try to repair your original one. In case of success, the repair costs are 95EUR. If your module is not repairable you can decide, if we take your movement in exchange or if you want to order a brand new one. You don´t want to do the module swap yourself?? Just send the whole watch! We change the modules and adjust the reed switches without additional costs.

Please mention: These are no NOS Pulsar / Omega or Hamilton modules and if you are no satisfied with our work, return the module within 1 week (+ shipping time) and we will refund your money!

If you are the owner of a SASM-10, 12, 20 or 22 module take the chance and change it against a new SASM-13, 14 or SASM-23 module for free. It doesn´t matter when you bought it or who bought it, just return the older module and we send a new one back.

Moreover we are always looking for non-repairable Pulsar modules. Please send us your offers!

You would like us to develop a module for your watch? Please send an email!

Email James!